Rapid LED 3″ LED to LED Wire (Solderless) – 22 AWG LED Connecting Cable

About This Product

The Rapid LED 3″ LED to LED Wire (Solderless) is a convenient, easy-to-install connecting cable designed to link two compatible solderless LED modules without the need for traditional soldering. Featuring a 3-inch length and 22 AWG wiring, this compact cable provides a practical solution for building, modifying, and maintaining custom LED lighting systems.

Custom LED lighting has become increasingly popular among saltwater aquarium enthusiasts seeking greater control over their aquarium’s illumination. Individual LEDs can be arranged to create lighting systems with specific combinations of wavelengths, colors, and intensities appropriate for the aquarium’s inhabitants.

A properly assembled LED fixture requires dependable electrical connections between each LED module. The Rapid LED solderless connecting wire simplifies this process by allowing compatible LEDs to be linked using their existing solderless connection points.

The 3-inch cable length provides additional flexibility compared with shorter 1.5-inch connecting wires, making it useful when LED modules require slightly greater spacing. This added length can help accommodate different LED arrangements, heat sink configurations, and custom fixture layouts.

Designed specifically for Rapid LED solderless non-XM-L LEDs, this wire offers a convenient alternative to cutting, stripping, and soldering individual electrical connections. The compatible solderless connector system makes assembly and component replacement more straightforward.

The 22 AWG conductor size provides the specified wiring format for this accessory. When used with compatible LED modules and properly selected drivers, the cable supports the electrical connections needed for a functional LED lighting assembly.

For reef aquarium applications, the wire can be incorporated into custom LED fixtures containing appropriate combinations of white, blue, royal blue, violet, and other compatible LED modules. The final lighting spectrum and intensity depend on the LEDs, optics, drivers, and control equipment selected.

The cable is also useful when repairing an existing lighting system, replacing a damaged connection, or rearranging LED modules during a fixture upgrade.

Whether you’re assembling a new DIY reef aquarium light, modifying an existing Rapid LED fixture, or replacing a worn connecting cable, the Rapid LED 3″ LED to LED Wire provides a simple and practical solderless connection solution.

Features:

• Solderless LED-to-LED connection links two compatible Rapid LED modules without traditional soldering.
• 3-inch cable length provides convenient spacing between adjacent LED modules.
• 22 AWG wiring offers the manufacturer’s specified conductor size for this connecting accessory.
• Designed for Rapid LED solderless non-XM-L LEDs provides compatibility with the intended modular LED system.
• No soldering required simplifies custom LED assembly and component replacement.
• Convenient for DIY aquarium lighting supports compatible custom reef aquarium LED projects.
• Flexible LED placement allows greater spacing between modules than shorter 1.5-inch connectors.
• Clean wiring layout helps minimize unnecessary cable clutter inside lighting fixtures.
• Suitable for custom LED arrays connects compatible modules in properly designed lighting circuits.
• Useful for LED repairs allows replacement of damaged interconnect cables.
• Supports modular lighting upgrades makes compatible LED connections easier to rearrange.
• Compact, lightweight design adds minimal bulk to custom lighting assemblies.
• Simple installation uses the existing solderless connection points on supported LED modules.
• Reduces assembly complexity eliminates the need to solder each compatible LED-to-LED connection.
• Practical for aquarium lighting enthusiasts provides a convenient component for custom LED fixtures.
• Suitable for compatible non-aquarium LED projects supports other applications using the appropriate Rapid LED solderless system.

Specifications:

Specification	Details
Brand	Rapid LED
Product Name	3″ LED to LED Wire (Solderless)
Product Type	Solderless LED Connecting Cable
Cable Length	3 inches
Approximate Metric Length	76.2 mm
Wire Gauge	22 AWG
Connection Type	Solderless LED-to-LED
Compatible LEDs	Rapid LED Solderless Non-XM-L LEDs
XM-L Compatibility	Not Compatible
Primary Application	Connecting Two Compatible LED Modules
Installation Method	Compatible Solderless Connectors
Soldering Required	No
Suitable Projects	Custom LED Fixtures and Compatible DIY Aquarium Lighting
LED Modules Included	No
Power Supply Included	No
LED Driver Included	No
Voltage Rating	Not Separately Specified by Manufacturer
Current Rating	Not Separately Specified by Manufacturer
Waterproof Rating	Not Specified
Recommended Environment	Protected, Dry Electrical Enclosure

Recommended Applications

DIY Reef Aquarium LED Lighting

The Rapid LED 3″ solderless wire is an excellent accessory for compatible custom reef aquarium lighting systems.

It allows users to connect individual LED modules while maintaining flexible spacing and an organized electrical layout.

Custom LED fixtures can be designed using suitable LEDs to provide lighting for fish-only marine aquariums, mixed reef systems, and coral propagation tanks.

The LEDs, drivers, optics, and heat sinks must be selected to meet the needs of the intended aquarium.

LED Fixture Repairs

Replace damaged or worn LED connecting wires in compatible Rapid LED solderless fixtures.

A properly fitted replacement cable can restore the connection between supported LED modules without requiring soldering.

Custom LED Arrays

Use the 3-inch cable to connect compatible LEDs positioned farther apart than the shorter 1.5-inch cable comfortably accommodates.

This can be useful when working around mounting hardware, heat sink features, or different LED arrangements.

Aquarium Lighting Upgrades

The solderless system makes it easier to modify certain LED layouts when replacing or rearranging compatible modules.

Always verify electrical polarity, driver specifications, and LED compatibility when changing the configuration.

Installation Instructions

1. Disconnect Electrical Power

Turn off the lighting fixture and disconnect its power supply before handling electrical components.

Allow LEDs, heat sinks, and surrounding components to cool before beginning work.

2. Verify Compatibility

Confirm that the LEDs use Rapid LED’s compatible solderless non-XM-L connection system.

This cable is not intended for XM-L solderless LEDs or unrelated connector systems.

3. Position the LED Modules

Arrange the two LED modules so the 3-inch cable can reach both connection points without being stretched.

Provide enough slack to avoid placing unnecessary tension on the connectors.

4. Connect the First LED

Insert one end of the cable into the appropriate solderless connector on the first LED module.

Make sure the connection is seated correctly according to the LED manufacturer’s instructions.

5. Connect the Second LED

Insert the opposite end into the corresponding connector on the second compatible LED.

Follow the required electrical connection pattern and polarity for the complete LED string.

6. Inspect the Installation

Confirm that the cable is securely connected and free from damage.

Keep the wire away from sharp metal edges, mounting screws, and excessively hot components.

Make sure the cable does not interfere with the fixture’s cooling or ventilation system.

7. Test the LED System

After verifying all wiring and electrical connections, restore power to the fixture.

Check that the connected LEDs illuminate and operate normally.

If an LED fails to illuminate, disconnect power before inspecting its connections.

Maintenance and Care Recommendations

Periodically inspect LED connecting wires for damaged insulation, loose connectors, corrosion, and signs of excessive heat.

Keep solderless electrical connections protected from aquarium water, salt spray, condensation, and other sources of moisture.

Disconnect power before servicing, replacing, or rearranging LED modules.

Avoid pulling directly on the cable when disconnecting compatible solderless connectors.

Use suitable cable management to prevent excessive tension on the connection points.

Replace damaged wiring instead of attempting temporary repairs that could compromise electrical safety.

Make sure the complete lighting fixture includes adequate thermal management for the installed LED modules.

Important Product Information

The Rapid LED 3″ LED to LED Wire is intended for connecting two compatible Rapid LED solderless non-XM-L LEDs.

It is not a universal LED connector and should not be assumed compatible with other solderless LED systems.

The manufacturer’s published specifications confirm a 3-inch length and 22 AWG wire gauge.

Individual voltage, current, insulation temperature, and waterproof ratings are not provided in the published listing. Confirm the requirements of the complete LED circuit before installation.

This product is an electrical connecting accessory only. LED modules, drivers, controllers, heat sinks, optics, and power supplies are not included.

For aquarium applications, all electrical connections should remain inside a protected, dry enclosure. The connecting cable is not intended for underwater operation.

Recommended application: A compact, 3-inch, 22 AWG solderless LED connecting cable ideal for linking compatible Rapid LED non-XM-L modules in custom reef aquarium lighting fixtures, LED repair projects, and modular lighting assemblies. Its convenient length provides additional spacing flexibility while eliminating the need for traditional soldering.