Emerson Effect Booster Board

Features

This simple to use, plug and play two-channel photo and far red board is designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensityThe board comes with 12 x�XP-G3 Photo Red�and 6 x�XP-E2 Far Red LEDs, 2 x Mean Well LDD-700LS drivers, a WAGO connector for dimming and a DC barrel connector for easy, solderless powerDoesn’t require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The�Supplemental Canopy Heatsink was designed to fit this strip and will slide into the�4′ x 4′ Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy SubstrateCan be combined with the�Emerson or Exotic Booster Boards�by using a�DC Power Splitter.If you are using your own power supply you will need to supply between 30-36VDC constant voltage, and a minimum of 30W per boardOptional Accessories:-1 x�30VDC Power Supply
-1 x�Supplemental Canopy Heatsink
-2 x Eye Bolts and 1 x�Rope Ratchet Hanging Kit

Specifications

LED Wattage :�~30WLEDs :�XP-G3 Photo Red and XP-E2 Far RedDrivers :�Mean Well LDD-700LSCoverage Area :�2′ X 4’Compatible Lens :�Ledil FlorenceDC Power Connector :�5.5mm OD/2.5mm IDDimming Signal :�Optional 2.5-6V PWMDimensions :�974mm X 47.5mm (~38.5″ X 1.9″)�

Instructions

Keep on during flower for increased yields