Site icon TROPICAL FISH & CORAL

How to Acclimate Fish and Coral

To reduce stress and increase survivability, all new animals should be properly acclimated as soon as possible before being introduced into a quarantine tank or aquarium.

Animals sold through our Suppliers are captive-bred in bio-controlled systems with standard aquarium water parameters. They are shipped within the continental US and are in transit for less than 24 hours. These acclimation guidelines may differ for other shippers’ livestock or animals from other sources, such as local fish stores. Tropical Fish and Coral recommends that you acclimate your livestock in a separate isolation tank for observation before adding them into your main display, when and if possible.

Temperature Acclimation

  1. TURN OFF THE LIGHTS & ATO

Turn off aquarium lights to reduce stress on the animal. If you have an Auto Top Off (ATO) system, switch it off before starting the acclimation process.

  1. FLOAT THE BAG

Float the sealed bag containing your animal in the aquarium for 15-20 minutes. This allows the temperature in the bag to equalize with the tank.

3A. Add Fish (Standard Method)

Once temperature acclimation is complete:

3B. Parameter Acclimation (If Needed)

This method is recommended only if the fish looks stressed upon arrival or if your aquarium has non-standard water parameters.

  1. OPEN BAG & TRANSFER TO CONTAINER
  1. ACCLIMATE USING TANK WATER
  1. TRANSFER FISH TO AQUARIUM
  1. REFILL THE AQUARIUM WITH SALTWATER

Coral Acclimation

saltwater aquarium

Corals are generally more resilient than fish when it comes to shipping stress. However, taking proper acclimation steps ensures long-term health. While BRS strives to provide clean, pest-free corals, it is still essential to inspect and dip new corals to prevent the introduction of pests, parasites, and algae into your aquarium.

Dipping Corals (Recommended After 24 Hours)

We do not recommend dipping corals immediately upon arrival. Instead:

Did You Know?

The leading cause of coral loss is improper dipping and the resulting stress. Always measure the correct amount of dip solution—adding extra chemicals does NOT improve effectiveness and can harm corals.

Step-by-Step Coral Acclimation Process

  1. Cut open the bags and pour water into a container. Gently place coral frags inside.
  2. Gradually add tank water until corals are fully submerged.
  3. Gently blow off corals with a baster to remove detritus.
  4. Place corals at the bottom of your reef on a frag rack to adjust to your aquarium’s lighting.
  5. After 24 hours, optionally dip and clean corals in a separate container.
  6. When mounting corals, use a tiny amount of superglue combined with a small ball of aquarium-safe epoxy for secure placement.
  7. Press the coral frag into the rock crevices to ensure stability.

Safe Handling Guidelines

By following these acclimation steps, you can significantly increase the survival and health of your new fish and corals, ensuring a thriving saltwater aquarium!

Exit mobile version