Dual Emerson/Violit Booster Board Set

Features

This dual board set includes everything needed to power two Emerson or Violit Boards without the need for any wire nuts, WAGOs, soldering, etc and covers a 4′ x 4′ to 5′ x 5′ spaceItems included in set:
2 x�Emerson Effect Booster Boards�or 2 x�Violit Booster Boards�or 1 x Emerson + 1 x Exotic Board
1 x�30V Power Supply
1 x�DC Power SplitterThe Emerson Board is a simple to use, plug and play two-channel photo (660nm) and far red (730nm) board designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensityThe Violit Board is designed to help round out spectrums not normally produced by white LEDs (365-370nm and 390-400nm) to help trichome production. Dimming of two separate channels requires a controller such as the Storm, and running without a controller will simply turn on all the lights at 100% intensityDoesn’t require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The�Supplemental Canopy Heatsink was designed to fit this strip and will slide into the�4′ x 4′ Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate. *Heatsink highly recommended for the Violit Board as this light generates plenty of heat at full power

Optional Accessories:-2 x�Supplemental Canopy Heatsink
-4 x Eye Bolts and 1 x�Rope Ratchet Hanging Kit

Specifications

LED Wattage :�~30-35W Per BoardLEDs : CREE Photo + Far Red/SemiLEDs UVADrivers :�Mean Well LDD-700LSCoverage Area :�~2′ X 4′ per BoardCompatible Lens :�Ledil FlorenceDC Power Connector :�5.5mm OD/2.5mm IDDimming Signal :�Optional 2.5-6V PWMDimensions :�974mm X 47.5mm� (~38.5″ X 1.9″) Per Board

Instructions

Use the�Emerson board during the entire flower cycle. Turn Exotic board on the last 2-4 weeks of flower